Porter-Cable PSH1 Gravity Feed Spray Gun

$143 $143
(as of 22/07/2010 03:19 - info)
Buy Now amazon
  • Gravity feed spray gun provides high-pressure spray power at low volume feed rates
  • Adjustable fluid and spray controls allows for customization
  • Stainless-steel nozzle and needle prevents clogging
  • Includes a 20-ounce re-useable paint cup
  • Backed by 2-yr limited warranty

Porter Cable’s HPLV Gravity Feed Spray Gun features innovative technology that allows for high-pressure spray power at low volume feed rates for better spray coverage with less overspray. This lightweight spray gun also features adjustable fluid and spray controls for customizing output based on chosen type of medium. The stainless steel fluid nozzle and needle ensure clog-free operation and make clean-up easy and quick. The spray gun comes with a 20-ounce re-useable paint cup.

Sprayers

5 Reviews

  1. Robert N. Copeland says:
    Posted February 19, 2010 at 12:00 am | Permalink

    This being my first time to you this type of system. I am very pleased with the results! Looks very professional due to the gun itself.

  2. F. Greenwood says:
    Posted February 10, 2010 at 12:00 am | Permalink

    I have found this product to be easy to use and I get good results, even with a smaller than ideal air compressor.

    I have mostly been using it with a 2.2 mm nozzle and latex paint mixed with Floetrol. I am mostly running it with a portable Dewalt air compressor. Perfect atomization of the thicker latex paints is tricky, but possible. The key is slightly higher pressure (well within the manufacturer’s limit). A high CFM air compressor would help too, because I sometimes wait while mine recharges.

    Perhaps the biggest surprise for me was just how easy the unit is to setup and to cleanup. I find the cleanup easier, for example, than cleaning a roller, and therefore it makes the product more pleasant to use.

  3. P. Pedrazzi says:
    Posted March 26, 2009 at 12:00 am | Permalink

    This thing is amazing for the price. Made me a pro. Super easy to use as well, but definitely get the 2.0mm insert. I tried latex paint (thinned) with the 1.5 and it was a big problem.

    Have fun!

  4. Robert W. Brooker says:
    Posted January 30, 2009 at 12:00 am | Permalink

    I’m very happy with this spray gun. This is my first spray gun and I found it very easy to use, it just took some practice to adjust the spray.

  5. Bruce says:
    Posted January 11, 2009 at 12:00 am | Permalink

    This is a good gun. Need to get the settings right; they are not adjusted from the factory at all. Here’s what worked for me, after MUCH experimentation, when spraying Zar Ultra Max Urethane.

    ‘X’ marks the spot:

    AV (Air Volume) at bottom of gun:

    Open / Down / Increase 0 – - – 1 – - X 2 – - – Closed / Up / Decrease

    PA (Pattern Adjust) on left of gun:

    Open/CCW 0 – - – 1 X – - 2 + Closed/ClockW

    FC (Fluid Control) at upper back:

    Open / Out /Increase 0 – - – 1 – - – 2 – - – 3 – - – 4 – - – 5 – - – 6 – - – X – - – 8 – - – 9 – - – Close/Decrease

    Regulator on gun: 45 to 50 psi, and on the compressor itself, 95-100 psi (see mfgr’s recommended limits for the gun).


Leave a Reply

Related Products